After turning on your TV, have you faced issues with Hisense tv black screen? It can be a major problem for anyone who wants to watch TV pressing fewer buttons. Before you solve the problem, can you guess why it happens?
If you have a black screen when your Hisense RokuTV won’t turn on, the problem may be caused by incorrect installation, a faulty input signal, bad cable connections, and poor components. For fixing the problem, you have to determine the Hisense tv problem’s black screen.
In this article, I’m going to break down the secrets why Hisense TV has black screen problems appears and the best way to fix them. So let’s dive right in!
Contents
Why Is the Hisense TV Black Screen Problem?
Hisense tv problems black screen causes sometimes because of improper electrical power supply. It might also happen when the Hisense TV has dropped suddenly. If you force too much onto hard surfaces or an exposed electrical wire.
If the unit is subjected to these types of stress, then you may experience the black screen issue on your TV set. In other cases, you can have the problem on account of a weak signal from your cable provider or satellite TV service providers. Sometimes it may happen due to incorrect installation, bad cable connections, or dirty connectors in the mainboard.
Hisense TV Black Screen Problem: 10 Effective Methods to Fix
When you’re having trouble with your Hisense Roku TV screen black or a buzzing sound, follow these steps to troubleshoot the problem.
Method 1: Factory Setting
The best and simplest way to fix the Hisense RokuTV black screen problem is by returning back the default setting of the device Factory Mode.
- Step 1: Turn on your TV and press the number button on the remote control. The default code will be 0131.
- Step 2: After entering the factory menu, go to the “Auto Source” option.
- Step 3: Select “Auto Source” and choose “Source list” to reset the TV. The manufacturer recommends you press number 1- 8 buttons at this stage. Standard source numbers are Digital Antenna, CATV, Computer, Component1, Component2, HDMI1, and HDMI2.
Press number 9 to confirm your selection and move up or number 0 to move down. You don’t need to select a source other than Auto Source for this Hisense TV Black Screen Problem. - Step 4: After you’ve confirmed the selection, choose “Exit” and then wait for about 10 seconds.
Method 2: Push Power Button
If none of the other steps above worked, try out this technique. In this case, slightly push the power button on your TV. It may restart an internal circuit that has gone bad or reset your TV to factory settings.
Method 3: Change TV Power Cord
When your Hisense Roku TV won’t turn on, plugging in a new TV power cord or a new wall plug will solve the problem. If you have not changed your TV power cords for a few years, it is quite easy for the wire to expose. Sometimes it may short-circuit due to friction between the cable and other objects.
Method 4: Turn Off All Components
Try turning off all components that attach to your TV, and then try powering it back on. For instance, if you have an Xbox One or Playstation 3 attached to your TV, unplug the HDMI cables for these components. Also, make sure nothing is plugged into any of the USB ports on your TV.
Method 5: Check Connection between Computer and TV
Make sure that you have a good connection between your computer and TV or have a Mac or have an iOS device. Or you have Android devices in order to make sure that your computer’s hardware is compatible with Hisense tv.
Method 6: Clean or Change the HDMI Cable
You should clean your HDMI cable if there is any dirt found. After cleaning the cable, you can get a new HDMI cable at local electronics stores if the problem happens.
Method 7: Update the firmware on your TV
Check the manual of your TV carefully and download the latest firmware update to update the mainboard of your TV to its latest version.
Method 8: Check the Wires
If you have a Hisense TV dark screen problem, check all the wires. You should also check if they are in the same port or connected perfectly. Sometimes the loose wire can cause the problem. But make sure your cables are in good condition.
If it could not solve your problem, feel free to try another method. Plug the wire into an external device as a test. If there is no fizzling out on the external device, you may need to replace cords on your television back. It will depend on how old the TV is.
Method 9: Install New Version of Chip Driver
You can install a newer version of the chip driver for your TV. The latest version of the driver can solve most issues connected with setting up.
Method 10: Contact Customer Service for assistance
If none of the previous steps has worked for you, contact Customer Service for assistance. He could find another option for troubleshooting on your Hisense tv model. Or, he can determine what is wrong before sending it in for repair.
Some Tips to Avoid Black Screen Problem:
- Always clean your HisenseTV and the cord portion.
- Check the wires after a few days’ gaps so that you may have prevented the loose connection.
- Try to check the updates of your software to face such small problems.
- Pay attention to the cables to see if they are damaged or getting old. Check them often to know their position.
Final Words!
When you have the Hisense tv black screen problem, try to find out why you are having this. If you get the prime cause, it will be easier to solve. When identifying, try out the steps I’ve described above to fix it in the best way possible.
However, if you’re still unable to get rid of it, contact the customer service provider as soon as possible, and they’ll do their job!
Graduated with a Bachelor of Audio Engineering and Sound Production. He has worked with a number of studios as a Recording Engineer, with over 10 years of servicing experience in both re-recording mixing and sound editing.
