A pair of Skullcandy earbuds are an excellent experience for all music lovers. These earbuds usually provide you with top-quality sounds and excellent design. But what do you do when you see the Skullcandy left earbud not working? Or the right earbud may stop working?
There are several reasons for the left earbud not working on your Skullcandy earbuds. Dirt getting stuck on the earbud is a very common reason. Additionally, any physical or water damage can cause the earbud to fail to work. Sometimes the earbud can stop charging, so it doesn’t work at some point.
Now, knowing the reasons won’t give you the solution. That’s why I suggest diving deep into this article to find out everything you need to know about fixing the problem. Let’s get started.
Fixing the issue of the left earbud not working
Here’s the thing, the left earbud, in particular, can be an issue for Skullcandy earbuds. The reason is that it’s the primary earbud between the two Skullcandy earbuds. So, you are prone to facing more issues with the left than the right.
Below, I will discuss the different causes for your left earbud not working and how you can fix them simultaneously.
Resetting the earbuds
There are usually two ways you can reset your Skullcandy earbuds. Resetting the earbuds can fix any software-related issues. Here’s how you can reset your earbud –
Method -1: The following steps should reset your earbud immediately to fix the issue –
- First, you have to get the earbuds inside the charging case.
- Then, unpair the earbuds from your device.
- Next, remove your left earbud from the charging case.
- Press and hold at the center of the earbud until you see a red light flashing.
- The earbud should reset as soon as the light flashes.
- You can put the earbud back in the charging case.
Now, you can do the same to ensure that the right earbud doesn’t go through any issues. After that, try connecting the earbuds to your device as you generally would. If you face the same issue of the earbud not working, you can move on to the second reset method.
Method -2: Remember, you can try the second method only when the first one doesn’t work. So, don’t try this one before the first method, as it’s a bit more complex.
- You must disconnect the earbuds from your device just like you did earlier.
- Then, hold the touch panel of your earbud for about 10 seconds. Then, could you place it in the charging case?
- Please do the same for your right earbud to ensure it doesn’t get left out with the issue.
- Next, you can get the earbuds out of the case and start pairing them.
Typically, following these two methods will restart the earbuds and fix any software problems. Other than that, if they still don’t work, then the earbuds may have some other issues I am about to discuss now.
Cleaning your earbuds
One common problem is dirt getting stuck on the earbuds. Stuck debris can cause the earbud to stop audio from flowing in it. Sometimes the dirt is so much that the earbuds will stop working.
To fix this problem, all you have to do is clean your earbuds. How do you do it? Well, that’s pretty simple.
First, you will need to clean the holes in the earbuds. For that, you can either use a toothpick or a needle. Insert the item into the earbud holes and clean up any dirt, earwax, or debris you see stuck in it. Try removing any lint on the earbuds if you see any.
Next, you have to clean the grills on the speaker using a small new brush. Please ensure the brush is soft. Otherwise, it may damage the speaker grills on the earbuds. You can also use suction tools to remove dirt or debris from the earbuds.
Charge the earbuds
This is not a problem. It’s more of a silly mistake from the user. Sometimes, you will find that your left earbud is not even appropriately charged.
As you may already expect, the solution to this problem is very simple. All you have to do is charge your earbuds. When the earbud is properly charged, you can get it out of the case and see it’s working just fine.
Well, usually, these are the issues that you will face regarding the left earbud not working. You can easily fix the issues you saw.
Summing up, Skullcandy left earbud not working is a common issue, and luckily you can fix it very easily. You don’t have to do too much to fix the problem, nor will you need to spend money on them. If the fixes I shared don’t work out, the earbuds may have gone bad. In that case, you might need to repair them or get new ones.
Graduated with a Bachelor of Audio Engineering and Sound Production. He has worked with a number of studios as a Recording Engineer, with over 10 years of servicing experience in both re-recording mixing and sound editing.