How To Connect Wireless Microphone To Amplifier. (Tips To Know)

The world is rapidly moving to a wireless base. Thus, why should microphones fall behind in this race?

In the entertainment industry, wireless microphones have accumulated quite a rave. These are thoroughly used for live performances, television broadcastings, public speaking, and so much more.

Moreover, performers, interviewers, and speakers love the free will they achieve while not dealing with wired microphones. But, to set up a wireless microphone that can give you the entire experience, you need an amplifier.

When amplifiers are connected to microphones, they can amplify the sound quality by converting it into an intense and larger sound wave. Typically, every concert or performance comes with the proper setup. However, there’s no harm in wanting to know the mechanics of it, right?

In this article, we will discuss how to connect wireless microphone to amplifiers. So, you don’t have to rely on experts anymore and can give it a shot yourself. Let’s dive right in!

Related: Wireless Karaoke Microphones

Contents

Using A Wireless Microphone:

For your wireless connection to work seamlessly, you need to make wireless microphone transmitter and receiver to be connected. The wireless mic produces electrical signals which are connected to the transmitter and then turned into radio waves.

Below we will discuss how to connect a UHF wireless microphone to simplify this entire ordeal for you. Let’s begin. However, before knowing how to use a wireless microphone, you need to check that you have these equipment.

What You Will Need

Wireless receiver.
Microphone and transmitter.
Two full-size antennas.
XLR cable.
Power supply.

Step 1At the back of the receiver, there are two connectors. You need to slide in the antennas and turn them in them until they lock.
Step 2It’s recommended that you place the antennas at 45-degrees like bunny ears. But you can also check the manual for these to see what it suggests.
Step 3On the receiver system, there’s a locking connector, which is great for reliability. You can plug in the power there by screwing it in to lock.
Step 4Next, you need to plug in the XLR cable by connecting the receiver to the audio mixer.
Step 5Lastly, you can set the settings for this at mic or line level according to your needs.

How To Connect A Wireless Mic

Step 1Tap the mode and set button until it blinks on the receiver.
Step 2Hit the jog knob so that it starts to scan the channels.
Step 3Turn on the microphone.
Step 4Press the mode and set buttons if needed to change the group number concerning the receiver. If that’s not necessary, you can hit mode again to lock it. After running the mode button, you will notice that the RF will climb up to five bars, which is a healthy sign.
Step 5Now, when you talk into the microphone, you should see the green lights at the back of the receiver blinking.

If all the steps occur as described, you’re good to go. That’s how you can connect a wireless microphone to a sound system and experience top-notch emceeing or performing events.

How To Connect Wireless Microphone To Amplifier:

To setup a wireless microphone system for the best sound quality, you will need a pre-amp. Microphones alone can’t handle the job because the electrical signals on them are far too low for recording.

This is also known as mic level, which is rendered useless without a mic pre-amp. Pre-amps are simply needed to amplify the sound quality making the signals more robust and fit for records. Unfortunately, most interfaces don’t come with built-in pre-amps.

So, let’s see how to connect wireless microphone receiver to amplifiers.

Step 1Join the mic receiver to any reliable power supply and attach the two-wave antenna to it. Turn on the power switch on the receiver.
Step 2Inject batteries in your mic and turn it on.
Step 3Check the frequency conversion or RF light function to check if the duo is connected. You can also check the frequency on the receiver to analyze if that matches the mic’s frequency.
Step 4Plugin the amplifier into a power source and turn it on. You can get the approval of it working by checking the activation lights.
Step 5Attach one end of the XLR cable to the amplifier and the other to your receiver.
Step 6Modify the amplifier’s volume according to your preference, and you’re done!

FAQs:

Can a wireless mic work with any receiver?Wireless mics will not work without receivers. The good news is that wireless mics can work with an array of receivers even if the models’ designs and styles differ. They will not work without receivers as the frequencies, nose reductions circuits, and secure encryptions might be incompatible.
Is connecting a wireless microphone with amplifier a necessity?Mics are often plugged in with amplifiers to amplify the sound quality. Generally, the signals and sound frequencies are too weak on the mics alone. Thus, an amplifier can emphasize them.
Can you plug a microphone with a powered speaker directly?Few powered loudspeakers come with microphone inputs. For this case, you can easily connect a mic to the speakers directly. Moreover, with the built-in options, you can also acquire an internal amplifier in the speaker to boost the level’s signals.

Wrap Up:

That’s how you can deal with cordless mike and amplifier. Pretty simple, right? At first sight, the entire ordeal might seem quite intimidating. However, wireless microphones are state-of-art creations and also lifesavers for many performers.They might be tricky to get ahold of at first. However, now that you know how to connect wireless microphone to amplifiers, it shouldn’t be of any bother. It also helps to watch videos to see if you’re headed in the right direction while hooking the wireless mics and setting them up. Lastly, I can only say best of luck and hope that you rock your performance.

Fred Castillo

Graduated with a Bachelor of Audio Engineering and Sound Production. He has worked with a number of studios as a Recording Engineer, with over 10 years of servicing experience in both re-recording mixing and sound editing.